How To Pick The Right Swimming Pool Chemicals

A swimming pool is a fantastic addition to any home, especially when warmer weather is on the horizon. You can relax in your own private pool, or exercise on your own terms. With a swimming pool, though, comes the responsibility of maintaining it. With the right information however it isn’t that hard. Here’s everything you need to know about swimming pool chemicals, Swindon based.

Buy the right form of chemicals for you

The most common type of chemical used in swimming pools is chlorine. This stops bacteria from breeding in the water, as well as avoiding algae and other life forms you don’t want in there. It comes in several different forms. They’re all as effective as each other, but they do have different advantages:

– 3 inch tablets: These are the least expensive as they’re the most common. You can drop them into pool water and let them do their thing, meaning you have to do less maintenance.

– Chlorine sticks: These are larger than tablets and slower to dissolve, which means you could get longer between treatments.

– 1 inch tablets: As the name implies, these are smaller tablets that dissolve more quickly. They’re suited to above ground swimming pools, as well as hot tubs and spas.

Whichever method you choose, remember that it needs to have the active ingredient Trichlor in it. To be most effective, look for products that have 90% Trichlor in them.

As well as these, you can use granular chlorine in your pool. Some need to be pre dissolved before being fed into the water, while others don’t. Which swimming pool chemicals Swindon based you use are up to you.

How to chlorinate your pool

There are several different ways you can ensure your pool is getting the right amount of chlorine. One of the best ways to ensure this is to use an automatic chlorine feeder in your pool. This means that you don’t have to worry about it for at least a week.

Preventing algae

As well as using chlorine, you’ll need to use others in order to stop algae growing in the water. To do this, you’ll need to use an algaecide. These chemicals are surfactants, which will kill any microorganisms on the surface of the water.

Maintain a good PH level

Finally, you need to maintain a good PH level in your pool, to ensure that it’s safe to swim in. An ideal level should be about 7.2, which is the same level as human tears. If you maintain your pool properly, you’ll have no problem with this area.

Follow these tips when it comes to swimming pool chemicals, Swindon based, and your pool will be welcoming and clean any time of the year.

Leave a Reply

Your email address will not be published. Required fields are marked *